|
|
|
|
|
|
|
|
How to Recharge a Cordless Drill Battery
|
|
Instructions
1.Plug the battery charger directly into the outlet. Avoid using extension cords to reduce the effects of voltage drop. Cordless drill battery chargers use transformers and solid-state components for charging batteries. Supplying less than adequate voltage to the charger has the potential to cause overheating and damage to the charger and battery.
2.Remove the battery from the drill and wipe any debris from the exposed terminals before inserting it in the charger. Line up the battery with the charger and slide it in all the way. A red or green power light will come on when the battery is in the charger. Different cordless tool manufacturers build chargers specifically for their batteries. For this reason, most batteries will only fit into chargers provided by the same company
3.Charge cordless drill batteries when temperatures are between freezing and 100 degrees Fahrenheit. Keep the charger clean and the vents free of debris. Allow the battery to stay on charge until the charger indicator shows the charge to be complete. Because different tool manufactures use a different sequence of colored indicator lights on their chargers, check the tools operating manual for the meaning of each light. Today's chargers often have a legend stuck to the charger showing what each light means and how to tell when the charge is complete.
|
|
|
|
|
|
|
|
|
|
